Page 186 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 186

Fig 6                                               • Once the flame has been generated, press        FITTED EQUIPMENT
                                                      the knob down for a few seconds so that the
Electric ignition of the hob                          flame remains lit.

 ! WARNING:                                          ! WARNING:

 Ignition must be done without any cookware          If the burner does not turn on:
 or other object on the burners.                     • check that there is gas in the cylinder.
                                                     If the device does not work, close the gas
• T o generate the flame, fully press down the      inlet tap and contact your dealer.
  control knob (Fig. 6 1) and turn it to the large
  flame position (Fig. 6 2).                        Regulation the hob flame
                                                    • To adjust the flame, turn the knob to the
• S imultaneously push down the electronic
  ignition button (Fig. 6 3).                         desired position (Fig. 6 1).
                                                    Oven
• Once the flame has been generated, press
  the knob down for a few seconds so that the        ! WARNING:
  flame remains lit.
                                                     The burner must only be ignited when the
 ! WARNING:                                          door is fully open. The rack, drip pan (tray) or
                                                     the pan must be positioned in the oven in a
 If the burner does not turn on:                     way that they are not directly in contact with
                                                     the flames. If the burner flame accidentally
 • turn the knob to the small flame position        goes out, close the gas knob and wait a
   (Fig. 6 4)                                        minute before relighting.

 • proceed with manual ignition;                    Fig 7
                                                    Electronic ignition of the oven
 • check that there is gas in the cylinder.         • To generate the flame, fully press down

 If the device does not work. close the gas           the control knob (Fig. 7 1) and turn it from
 inlet tap and contact your dealer.                   position 1 to 6 (Fig. 7 2).
                                                    • Simultaneously push down the electronic
Manual ignition of the hob                            ignition button (Fig. 7 3).
If the electronic ignition does not work, the       • Once the flame has been generated, press
manual ignition is used as a substitute.              the knob down for a few seconds so that the
                                                      flame remains lit.
 ! WARNING:

 Ignition must be done without any cookware
 or other object on the burners.

• T o generate the flame, fully press down the
  control knob (Fig. 6 1) and turn it to the large
  flame position (Fig. 6 2).

• Simultaneously ignite the burner with a
  match or gas lighter.

                                                                                                       173
   181   182   183   184   185   186   187   188   189   190   191