Page 249 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 249

WATER FAULTS

FAULT FINDING  Water           Cause                         Remedy
                               Freshwater tank empty         Check
                Fault          Pump wired in reverse         Check wiring, refer to pump manufacturers
                Water not                                    instructions
                flowing from   Pump not primed               Refer to pump manufacturers instructions
                any tap when   Pipe inlet or outlet pipe     Check connections
                operated but   disconnected
                pump runs      Pump pipes restricted         Check pipes run
                               by kinking
                Pump does      Blockage in pump inlet or     Check, starting inside freshwater tank
                not run        outlet pipe
                               Blocked in-line filter of     Dismantle and clean
                Water flows    pump filter
                from cold tap  Air leak in suction line      Check for bubbles & secure with clip
                but not from   to pump
                hot            Pump or tap                   Refer to pump/tap manufacturers instructions
                               incorrectly wired
                               Pump fuse blown               Check wiring connection and then replace with
                                                             fuse of correct rating
                               Battery disconnected          Check connections
                               Pump seized or overheated     Refer to pump manufacturers servicing
                                                             instructions
                               Pressure pump sensing         Refer to pump manufacturers servicing
                               switch may have failed        instructions
                               Contacts may be faulty        Check contacts in plug and socket are clean
                                                             and making contact
                               Wiring connections may        Check wiring connections
                               be faulty
                               Feed pipe to water heater     Refer to installation instructions
                               incorrectly connected to the
                               heater outlet                 Disconnect pipes and inspect
                               Blockage in hot pipeline      Check and re-route if necessary. Ensure that
                               Heater inlet or outlet pipes  hose is Carver recommended type
                               kinked preventing flow        Refer to installation manual
                               Hot tap not connected         Disconnect and inspect
                               Hot tap failed or blocked     Seek service attention
                               Heater non-return valve
                               jammed

236
   244   245   246   247   248   249   250   251   252   253   254