Page 174 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 174
Failure: The refrigerator does not cool in FITTED EQUIPMENT
230 V operation.
Possible cause Action you can take
On-board fuse defective Fit new fuse
Vehicle not connected to mains supply Make a connection to a mains power supply
voltage
AES: Gas operation despite connection to the Appliance switches to gas operation due to
mains supply voltage? insufficient mains supply voltage (automatical-
ly switches back to 230 V operation)
Heating element defective (please refer to Please inform Dometic Customer Services
failure indication
Information on failure display Status indicators
and trouble-shooting
1 2 34 6 78
• Refrigerators with an electronics system
(MES, AES) indicate the occurence of a MES Fig. 51
malfunction by the LED or display flashing.
1 - Button ON / OFF
• If a malfunction occurs, the indicator LED
“Failure” (8) flashes simultaneously. In the 2 - Energy selector switch 230 V AC
case of AES models an acoustic alarm
sounds. 3 - Energy selector switch GAS
Before notifying the authorised Service Center, 4 - Energy selector switch 12V DC
please check whether:
6 - temperature level button
• the instructions in section “Operating the
refrigerator” have been observed. 7 - temperature level display
• the refrigerator stands level. 8 - fault LED / GAS FAULT reset button
• it is possible to operate the refrigerator with
any available power source.
161
