Page 86 - 2017-Swift-Group-Motorhomes-Handbook-web

harmonised standards. In most cases the H) Check operation of equipment. ELECTRICS
site warden will hold information regarding It is now safe to operate the 12V and 230V
suitability of supply. If using a generator you equipment.
also need to comply with the requirements /
instructions supplied with the generator.

Please note that some electronic generators
may not be compatible with your leisure
system. Further generator operational
information is contained elsewhere in this
manual.

B) Switch the PSU internal Power
Converter OFF.
Locate the green ‘Charger’ power switch on
the PSU and ensure the switch is in the off
position (button out) before connection to the
mains supply.

C) Connect the Hook-up Lead.
Firstly connect the supplied hook-up lead
(orange cable with blue connectors) to the
Leisure Vehicle and then connect to the mains
supply.

D) Check Residual Current Device
operation.
Locate the RCD within the PSU and ensure
the RCD is switched on (lever in up position).
Press the ‘Test’ button and confirm that the
RCD turns off (lever in down position). Switch
the RCD back to the on position (lever in up
position). If the test button failed to operate the
RCD see section 3.18.

E) Check Miniature Circuit Breakers
Locate the MCB’s within the PSU (adjacent to
the RCD) and ensure they are all in the on (up)
position. If any MCB’s fail to ‘latch’ in the on
position see section 3.18.

F) Turn the PSU ON.
Locate the black ‘Shutdown’ button and
ensure it is in the on position (press button in).
Locate the green ‘Charger’ switch on the PSU
and turn to the on position (press button in).
The charger switch will illuminate when turned
on.

G) Check correct Polarity.
Locate the ‘Reverse polarity’ indicator on the
PSU and ensure that the indicator is NOT
illuminated. If the indicator is illuminated see
section 3.18.

73