Page 89 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 89
ELECTRICS SWIFT COMMAND POWER CONTROL SYSTEM
Pump Button. With the power on, press the pump button to turn the water
pump on. Press the button again to turn the pump off. The adjacent LED
will illuminate when the pump is on and the level of the water tank will be
shown on the screen.
Interior Lights Button. With the power on, press the lights button to turn
the main lighting supply on or off.
Light Dimming Button. With the power on, press the dimmer button to
turn the dimmed lighting on or off. Press the select button to adjust the
dimmer level (the menu automatically changes to the adjustment screen).
The last setting is remembered.
Awning Light Button. With the power on, press the awning light button
to turn the awning light on or off. The Adjacent LED will illuminate when
the awning light is on. The awning light may also be controlled by the
motorhome locking system.
Note, display illumination. The LCD back 2.6 Operation while driving
light will illuminate for the pre-set time (default
time is 30 seconds) adjustable between 5 and The EC600 system is designed to shutdown
120 seconds. Setting the timer to 0 seconds parts of the system while the engine is running.
will force the backlight to be permanently on. This is to meet Electro Magnetic Compatibility
The illumination of the blue LED’s adjacent to (EMC) regulations and to ensure the safe
the power, pump & awning light buttons can operation of the motorhome.
be configured in the same way as the back-
light. The screen will wake up if your hand is Please ensure the system shutdown switch on
placed near the panel or if a button is pressed. the PSU is in the on (button in) position before
driving (see 2.2). This will ensure the electronic
system is active and will therefore be able
to control the charging process, supply the
refrigerator and monitor other system circuits.
When fitted, designated 12V sockets, en-route
reading lights and en-route heating will remain
operational while the engine is running.
With the engine running the screen will show
ENGINE RUNNING, the leisure and vehicle
battery icons will be displayed to indicate they
are being charged and the charging voltage
will be show in the main display.
76