Page 145 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 145

ALDE HEATING TROUBLESHOOTING

FITTED EQUIPMENT  “Overheat PCB”                                     • C heck control panel part number. Control
                                                                       panel 3020-013 is for 3020 A-series boiler,
                  • Failsafe in boiler has triggered.                  3020-113 is for 3020 HE-series boiler.

                  • Check the fluid level in the expansion tank.    If problems persist, please contact Alde, or
                    It should be 1 cm above the Min mark when        your dealer or installer.
                    cool.
                                                                     For our frequently asked questions, or
                  • C heck the boiler compartment is ventilated,    download all instruction manuals, please visit
                    and that the vents are unobstructed. Do not      our website at: www.alde.co.uk
                    place stowage in the boiler compartment.

                  “Fan failure”

                  • C ombustion fan speed too low. Bearing may
                    be stiff after a period of disuse.

                  • A utomatically clears after 5 mins. Please try
                    again.

                  “Connection failure”

                  • Loose connection between Alde control
                    panel and boiler.

                  • Unplug cable at the control panel and boiler,
                    then carefully plug back in.

                  • Check there is slack on the cable at the
                    control panel, but not excessive weight from
                    free- hanging/unmanaged cable.

                  “Window open”

                  • O ptional window sensor has triggered, gas
                    heating is suspended. Automatically clears
                    and gas heating resumes when window is
                    closed.

                  “3rd Party Panel C. Fail”

                  • B reak in comms between Alde control panel
                    and third party control panel.

                  • C heck the cable between the Alde control
                    panel and third party control panel.

                  • T hird party control panel is installed in
                    software but not fitted.

                  • Untick “Third Party Panel” in Installed
                    Accessories Menu.

                  “Low battery”

                  • 12 V supply to boiler has dropped below
                    10.5 V, possibly causing system brownout.

                  • Automatically clears when 12 V supply
                    reaches 11 V.

                  “No match Heater/Panel”

               • C ontrol panel is incompatible with boiler
                 PCB.

132
   140   141   142   143   144   145   146   147   148   149   150