Page 140 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 140
Prioritise Pump Manual For the 12V inline FITTED EQUIPMENT
Select whether to prioritise gas 12 V. circulation pump with
heating or electric heating, when
using both. Less demand will be manual 5-speed dial.
placed on the non-prioritised fuel.
P ump For the remote-controlled
TiP! If you’re hooked up to a site with a flat Remote 12 V 12 V inline circulation
rate 230 V supply, but still want the extra pump. Pump speed can
performance from gas heating, prioritise Optional also be set. Speed 2 is
electric heating to save money on gas. Pump 12 V. recommended. Speed 4–5
should only be used prior
Button Sound to bleeding the system
of air.
Bleep when a button is pressed.
For the optional 12V
Backlight circulation pump in the
expansion tank.
T he brightness of the Standby
Screen can be adjusted from 1–3. Pump 230 V. For the 230V inline
The display mode of the Standby circulation pump
Screen can also be set.
Auto. Automatically selects the
Dark. The Standby Screen is deactivated,
the control panel may appear dormant 230V pump when a 230V
except for the power LED. Pressing the
screen will activate the Standby Screen for supply is detected, or
30 secs. Suited for use in dark/night-time
conditions. the optional 12V pump
Bright. The Standby Screen shows dark when only 12V supply is
characters on a light background. Suited for
use in bright/day-time conditions. available.
Invert. The Standby Screen shows light Pump mode can also be set.
characters on a dark background. Suited for
low light conditions. Cont. The pump is continuously active. This
will reduce the hot water supply. For testing
Antimicrobial (requires Clock the circulation pump in the summer, if room
to be set) temperature exceeds 30°C.
H ot Water Boost will automatically Thermo. The pump is controlled by the room
activate at 02:00 every morning. thermostat.
This further reduces the risk of
Legionella bacteria. External Switch
Circulation Pump A llows you to use a third party,
external switch to start up and
S elect which circulation pump shutdown the boiler. When the
to use for the central heating, external switch starts the boiler,
depending on what pumps are it will provide heating using the
installed. (your motorhome is last saved settings. Once External
fitted with ‘pump manual 12V’). Switch is enabled, the system
should be shut down by pressing
the Power button. The external
switch then takes control of the
boiler.
127
