Page 138 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 138
i. H ot Water Ignore. Volume bar empty. What’s Activated Menu FITTED EQUIPMENT
No attempt is made to heat hot water Press the A button to access the What’s
specifically. This saves energy when the Activated Menu. This screen shows any
freshwater is drained down. functions that are activated and allows direct
access to that function by pressing its button.
ii. H ot Water Normal. Volume bar half-full. Hot NB: The A button is not displayed if no
water is heated to greater than 50°C. NB: If functions are activated.
Circulation Pump is set to Continuous, this
option will not be available. Note: Not all Alde functions are relevant to a
motorhome installation, (activated functions
iii. H ot Water Boost. Volume bar full. Central are shown below)
heating circulation is disabled for 30 mins.
Hot water is heated to greater than 65°C. Activated Functions
After 30 mins the system reverts to Hot
Water Normal. Night Mode is enabled, but
may or may not be active,
iv. Adjust by pressing Plus or Minus button. depending on the time and
day.
Electric Heating
Delayed Start/Cycle is
Check that 230v supply is displayed on the enabled, but may or may not
Standby Screen. The Alde boiler is hard wired be active, depending on the
to use power economically and there are times time and day.
when it may use no power at all, even if set to
3kW. Alde Smart-Control or
daisy-chained, third party
i. S elect Off, 1, 2 or 3 kW electric heating. control panel is enabled. This
More power equals better performance, but includes the Swift Command
may be restricted by the current (amps) limit system. Ensure this feature is
on the electric hook-up. enabled.
ii. Adjust by pressing Plus or Minus button. Circulation Pump is set to
Continuous. NB: This will
Max current draw from 230 V supply is 4.5 reduce the hot water supply.
A on 1 kW, 9 A on 2 kW, 14 A on 3 kW. If
the electric supply has unstable voltage, the
amperage will also fluctuate.
Gas Heating
The Alde boiler is hard wired to use power
economically. The gas burner has two stages,
shifting dynamically between low or full flame.
There are times when it may use no power at
all, even if gas heating is selected.
i. P ress the Flame button to select gas heating.
Green is on, blue is off.
Use both gas and electric heating for best
performance.
125
