Page 137 - 2017-Swift-Group-Motorhomes-Handbook-web

ALDE CONTROL PANEL

FITTED EQUIPMENT C. Room temperature ii. Main Menu.
Measured at the control panel. a. What’s Activated Menu
(Optional discrete room temperature [Not displayed if no activated functions are
sensors available). detected.]
b. Settings Menu
D. Circulation pump
Central heating circulation pump is active. Desired Room Temperature
The desired room temperature can be set from
E. Delayed start 5 to 30°C, in 0.5 increments.
Delayed Start/Cycle is enabled. Tip! T he World Health Organisation

F. Day mode recommends a room temperature of
Day Mode active. 18–24°C for healthy living.

G. Gas cylinder status Note: If Day or Night Mode are active, the
Gas Cylinder Status. Full/empty and active temperature cannot be adjusted, the Plus
EisEx shown. (Additional accessories required). and Minus buttons will be greyed out.

H. Night mode 1. The current desired room temperature is
Night Mode active. displayed.

I. 230v supply 2. Adjust by pressing Plus or Minus button.
If not displayed, the boiler is not receiving 230v Domestic Hot Water
supply. The Alde boiler stores 8.4 Litres of hot water
as standard. If the hot water cylinder is empty,
J. Power button the air is heated but no damage can result.
Press to switch system on-off. Lit green LED Tip! In a good summer, for example, lower
indicates system is on.
the desired temperature on the control
K. Menu button panel to around 10°C. The central heating
Press to access Main Menu from Standby will not circulate (unless the temperature
Screen or Settings Menu. drops to 10°C), but you can still control
hot water.
3. Main menu

Press MENU button to access the Main Menu
from the Standby Screen or Settings Menu.
The screen will revert to the Standby Screen
after 30 secs if untouched.

i. Standby Screen. Press MENU button.

Note: If Day or Night Mode’s Hot Water
Ignore is active, the hot water cannot be
adjusted, the Plus and Minus buttons will be
greyed out.

124