Page 201 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 201

THETFORD C400 CASSETTE TOILET

FITTED EQUIPMENT  q.	Rotating emptying spout: ensures that the         the stated quantity of toilet fluid into the
                       waste tank can be easily and hygienically        waste tank. This avoids unpleasant smells in
                       emptied.                                         the waste tank and keeps the inside of the
                                                                        waste tank clean. Next add approximately
                  r.	Access hatch to waste tank: lockable from         2 litres of water - enough to ensure that
                       the outside of the vehicle.                      the bottom of the waste tank is covered.
                                                                        Screw the cap back onto the emptying
                  Preparing for use                                     spout. Turn the emptying spout back to its
                                                                        original position. N.B. The emptying spout
                  C-402C, C-402X and C-403L                             measuring cap is supplied in the same
                                                                        packaging as this manual.
                  1. O pen the access door on the outside of
                     your motorhome.                                  ! WARNING: Never add toilet fluid via the

                  C-402C and C-402X                                   valve blade or via the toilet bowl.

                  2. R otate the waste tank emptying spout          10. Slide the waste tank back into its original
                     90 degrees and remove the water filling              position via the access door.
                     extension (you will find it positioned beneath
                     the handle closest to the emptying spout).       ! WARNING: Never use force if you

                  3. Rotate the waterfill funnel outwards, remove    cannot get the tank back into place easily.
                     the cap and place the extension on the           This may cause serious damage.
                     waterfill funnel. Add the stated amount of
                     Thetford fresh water additive to the water      11. Made sure that the waste tank is secured
                     tank. This ensures a better and cleaner flush        with the safety catch. Shut the access
                     and keeps the water in the flush tank fresh.         door and lock it.

                  4. F ill the water tank with clean water.
                     Warning: keep water level below the top of
                     the water filling funnel.

                  5. R emove the extension and return to its
                     original position on the waste tank.

                  Note: depending on the space between the
                  door and waste tank, this extension part
                  may also be fixed on the door with a hook.
                  Screw the cap back onto the water filling
                  funnel and push back inwards towards the
                  side of the flush water tank.

                  Note: 150ml of water will remain in the
                  waterfill funnel when the water tank is empty.

               C-402C, C-402X and C-403L

               6. R emove the waste tank by pulling the safety
                  catch upwards.

               7. Pull the waste tank outward to the stop. Tip
                  it slightly and take the tank fully out.

               8. Place the tank upright and turn the
                  emptying spout upwards.

               9. R emove the cap, with the measuring cup
                  inside, from the emptying spout and pour

188
   196   197   198   199   200   201   202   203   204   205   206