Page 101 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 101

SWIFT COMMAND POWER CONTROL SYSTEM

ELECTRICS  Fault           Possible Cause           Proposed Fix

           No 12 volt output No 230V supply         Check all above

           from PSU        Charger not switched on Turn charger switch on, switch will illuminate

                           Battery not connected    Install charged battery as per 3.4
                           and / or charged

                           Power button on control Turn power on at control panel
                           panel not switched to on

                           Battery flat / Battery fuse Recharge battery, check fuses, check charging

                           blown                    voltage is present at battery

                           Fuse blown               Check all fuses are intact and the correct value
                                                    fuse is installed as per fuse table

                           Equipment switched off Check equipment is switched on and connected

                           / unplugged              to the 12V supply

                           Other fault              Contact your Dealer

           Pump not        Fuse blown               Replace fuse with correct value as per fuse
           working         Pump turned off          table.
           illuminated
           on PSU                                   Turn pump on by pressing the pump button at
                                                    the control panel.

                           Setting incorrect        Both the internal and external pump feeds
                                                    are controlled from the control panel. To alter
           Lights not      Fuse/s blown             the setting of the pump switch see section
           working         Lights turned off        3.8. Ensure the setting matches your desired
                                                    requirement.
           Bluetooth       Bluetooth not paired
           Communications                           Replace fuse with correct value as per fuse
           not working     Bluetooth not active on  table.
           illuminated on  Device
           PSU                                      Turn Lights on by pressing the lights button, use
                                                    dimmer at the control panel.
                           Bluetooth out of range
                                                    Using System Settings menu, select Bluetooth
                                                    Pair option

                                                    Ensure that the handheld device has Bluetooth
                                                    switched on and that the device supports the
                                                    Bluetooth 4 standard (BLE)

                                                    Ensure the handheld device is within 7M of the
                                                    middle of the caravan/motorhome switch see
                                                    section 3.8. Ensure the setting matches your
                                                    desired requirement.

                           Bluetooth connection     See App user guide for further details
                           issue

           Remote          Account details          Enter details in Account page of App settings

           Communications notentered on App         menu

           not working     Account not registered Check with supplying dealer or Sargent Electrical

88 at time of vehicle delivery that an account has been registered.
   96   97   98   99   100   101   102   103   104   105   106