Page 119 - 2017-Swift-Group-Motorhomes-Handbook-web
P. 119
TRUMA DIGITAL TIMER CONTROL
FITTED EQUIPMENT Notes: Quick temperature change using Change the hot water level
rotary push button possible (in Stand-by
screen). Select icon in menu bar (3) with rotary push
button.
1 Automatic air conditioning system (AUTO)
only if “ACC” has been activated in the • Change by tapping in the setting level.
service menu (see “Service menu” on page
111). This is deactivated at the factory. • Select desired level with rotary push button.
2 Symbol flashes until the desired room • T ap the rotary push button to confirm the
temperature is reached. value.
Automatic air-conditioning system (AUTO) – = OFF - H ot water generator is switched
off.
Settable temperature range 18 – 25°C
(1°C steps) a = Boiler1 - H ot water generator is switched
on.
Automatic switch over between heater and
air conditioning system for an approximately b = Eco2 - Hot water temperature 40°C
constant temperature on the inside.
c = Hot - Hot water temperature 60°C
f = AUTO - A utomatic air-conditioning
system is activated d = Boost1 - T argeted, rapid heating of
boiler contents (Boiler priority)
Requirements for operation with automatic air- for a maximum time window
conditioning system: of 40 minutes. Then the water
temperature is kept at the
• The heater and air conditioning system must higher level for two post-heating
be connected. cycles (about 62°C). After
reaching the water temperature,
• A utomatic air-conditioning system “ACC” heating of the room continues.
must be activated in the service menu (see
“Service menu” on page 111).
Notes:
1 T his symbol flashes until the required water
temperature has been reached.
2 A hot water temperature can only be
maintained with combined room and water
heating for a limited time at 40°C.
106
